Mini Home Theater

Description

The Sonic Barrier 1" acoustic damping foam is a precisely engineered material that offers optimum absorption for its thickness. The material features our exclusive embossed surface finish that helps to trap acoustic energy and improve high frequency performance. This finish is applied to an acoustic-grade open-cell polyether foam, which absorbs and converts the acoustic energy into low-level heat. A very aggressive pressure sensitive adhesive provides easy and permanent installation onto any surface. The Sonic Barrier 1" foam is excellent for general loudspeaker cabinet use. The non-composite nature of this material means that it acts as a sound absorbent across a wide range of frequencies. For situations where the cabinet walls are already acoustically dead, composite barriers may not be necessary-- in this case, the pure foam material can offer a lower-cost alternative with minimal difference in performance. The foam will help absorb unwanted sound from within the cabinet without disrupting airflow between the driver and port. This can reduce unwanted sound reflections and prevent them from exiting through the cone or port. The foam can cause an increase in apparent volume, which can help to offset the space taken up by the driver or the port. Sold in 18" x 24" Sheets

Features

• Precisely engineered material that offers optimum absorption for its thickness
• Features our exclusive embossed surface finish
• Helps to trap acoustic energy and improve high frequency performance
• Absorbs and converts the acoustic energy into low-level heat
• Non-composite nature of this material

Description

The VE-1 was formulated for maximum damping efficiency over a broad frequency and temperature range. It is made of a mineral filled viscoelastic polymer that transforms vibrational energy into thermal energy (low level heat). It provides twice the damping of asphalt based product without the weight and odor. The VE-1 has a grain leather finish and is cosmetically pleasing, so it can be used on front speaker baffles and other applications that are visible to the eye. The flexible nature of the VE-1 damping sheets enables it to mold and conform to irregular surfaces. It can be easily cut using a standard razor knife or scissors. The pressure sensitive adhesive makes for easy peel and stick installations and will adhere to most surfaces including metal, wood and fiberglass. Excellent flame resistance, can handle continuous temperatures up to 250° F and meets UL94V-O. Thickness: .050".

Features

• Twice the damping and half the weight of asphalt based damping sheets
• Easy peel and stick application
• Makes excellent gasket material

Description

Whether your application is a large distributed constant voltage sound system or a high SPL sound reinforcement system, the Atlas Sound CP700 is the perfect answer for high power/low cost amplification needs. A professional grade audio power amplifier specifically designed for demanding contractor applications, the CP700 features esoteric grade toroidal power supply and output transformers. These transformers were chosen for their outstanding reliability as well as extended frequency response. Plus, the CP700's two independent channels are driven by separate power supplies to ensure maximum channel separation and ultra low distortion figures while providing years or faithful service. Specifications: • Power output: 240 watts x 2 (8 ohms), 400 watts x 2 (4 ohms), 550 watts x 2 (2 ohms) • Bridged mono: 850 watts x 1 (8 ohms); 1,100 watts (4 ohms) • Transformer outputs: 280 watts x 2 (25V), 350 watts x 2 (70.7V/100V), 700 watts x 1 (140V/200V Bridged) • Frequency response: Direct: 30 Hz-50 kHz; Transformer: 30 Hz-16 kHz • S/N ratio: >100 dB • Voltage gain: 32 dB • Damping factor: >200 dB • Net weight: 54 lbs. • Dimensions: 18.9" W x 5.19" H x 16.85" D • Mfg. #CP700

Features

• Stereo, bridge, or parallel operating modes selectable via rear mounted switch
• Balanced inputs on barrier strip and XLR connectors
• Short-circuit, temperature, and DC offset protection
• 25V, 70.7V, 100V, and direct-coupled barrier strip outputs
• Soft clip limiter protection

Description

The SM8SUB70 8 subwoofer system is perfect for restaurants, bars, and high-fashion retail outlets. The system utilizes a 8 woofer housed in a 915 cubic inch multi-angle, flyable, wood enclosure system to provide extended low frequency response with a wide variety of mounting options. Not for outdoor use.Inserts are included for use with 14-20 drop forge eyebolts, optional SM8CBKT-B -W mounting bracket and OmniMount 30 series hardware. An 18 dBoctave three-pole passive crossover eliminates the need for a separate electronic network or dedicated amplification to power the speaker. Its low crossover point 120Hz nearly eliminates localization, allowing a designer to boundary-load the SM8SUB70-B near a wall or into a corner for maximum output, while maintaining even coverage throughout the space.

Features

• Multiple 1D4-20 inserts, providing fly points for a variety of mounting configurations
• Includes internal high efficiency 60 Watt 70.7100V transformer may be bypassed for 8 ohm operation
• Barrier strip input for 70.7100V8 ohm or parallel 4 pole Speak-On input for 8 ohm operation only
• Unique input panel allows use of standard 4 square
• box cover Raco 753 or eq. for applications where flex conduit is required for termination

Description

The SM8SUB70 8" subwoofer system is perfect for restaurants, bars, and high-fashion retail outlets. The system utilizes a 8" woofer housed in a 915 cubic inch multi-angle, flyable, wood enclosure system to provide extended low frequency response with a wide variety of mounting options. (Not for outdoor use!). Inserts are included for use with 1/4"-20 drop forge eyebolts, optional SM8CBKT-B /-W mounting bracket and OmniMount™ 30 series hardware. An 18 dB/octave three-pole passive crossover eliminates the need for a separate electronic network or dedicated amplification to power the speaker. Its low crossover point (120 Hz) nearly eliminates localization, allowing a designer to boundary-load the SM8SUB70-B near a wall or into a corner for maximum output, while maintaining even coverage throughout the space. A premium 70.7V transformer allows the SM8SUB70 to be paralleled with any 70.7V commercial audio system to provide extended low frequency response and more overall audio impact for foreground music systems. (Unit is also 8 ohm compatible).

Features

• Attractive, yet heavy-duty grille assembly
• Barrier strip input for 70.7/100V/8 ohm or parallel 4 pole Speak-OnT input for 8 Ohm operation only
• Durable black, rough-coat finish
• Fuse protection for driver
• Includes internal high efficiency 60 watt 70.7/100V transformer

Description

SheetBlok Sound Isolation Barrier is a dense, limp-mass vinyl material that is about 6dB more effective than solid lead at stopping the transmission of sound. It acts as a thin, dense sound barrier layer in walls, ceilings or floors and is most effective when used as one component of a multi-layered construction scheme. SheetBlok helps in decoupling (i.e. floating) floors and walls and, while it's not normally considered a finish product per se, it is paintable with latex paint.

Features

• dense, limp-mass vinyl material that is about 6dB more effective than solid lead at stopping the transmission of sound
• Service Temperature: -40° to 180° F
• Tensile Strength: 400 psi Tear Strength: 70#/inch; Flammability: Rated UL94 S.E. "0"; Passes test MVSS-302

Description

The SM8CXT-B features the high efficiency and pattern control of Atlas Sound's compression driver coaxial loudspeakers in a new, highly versatile enclosure system. Internal hardware for flying includes multiple (12) 1/4"-20 inserts for overhead suspension in most any orientation. A unique input panel allows use of standard 4" square box cover (Raco 753 or eq.) for applications where flex conduit is required for termination. A 90° conical pattern (2 kHz octave band) and amazing efficiency make these a perfect choice for a wide variety of high-ceiling applications including school auditoriums, gymnasiums, cafeterias, convention centers, church sanctuary systems, and more. Sold individually. Specifications: • Power handling: 150 watts RMS • 70.7V Taps: 7.5, 15, 30, 60 watts (plus xfmr. bypass for 8 ohm operation) • Frequency response: 60 Hz-15 kHz • Sensitivity: 92 dB 1W/1m • Dispersion: 90° • Net weight: 19 lbs. • Dimensions: 15-1/2" H x 10-5/8" W x 10-3/8" D • Mfg. #SM8CXT-B

Features

• High performance Atlas Sound coaxial loudspeakers in a versatile, flyable, wood enclosure
• Durable, black, rough-coat finish with an attractive, heavy-duty metal grill assembly
• Internal, high efficiency 60 watt 70.7/100V transformer (may be bypassed for 8 ohm operation)
• Barrier strip input for 70.7/100V/8 ohm or parallel 4-pole Speakon® input for 8 ohm operation only
• Fuse protection for low and high frequency drivers

Description

The SM12CXT-B features the high efficiency and pattern control of Atlas Sound's compression driver coaxial loudspeakers in a new, highly versatile enclosure system. Internal hardware for flying includes multiple (12) 1/4"-20 inserts for overhead suspension in most any orientation. A unique input panel allows use of standard 4" square box cover (Raco 753 or eq.) for applications where flex conduit is required for termination. A 90° conical pattern (2 kHz octave band) and amazing efficiency make these a perfect choice for a wide variety of high-ceiling applications including school auditoriums, gymnasiums, cafeterias, convention centers, church sanctuary systems, and more. Sold individually. Specifications: • Power handling: 250 watts RMS • 70.7V Taps: 7.5, 15, 30, 60 watts (plus xfmr. bypass for 8 ohm operation) • Frequency response: 55 Hz-15 kHz • Sensitivity: 99 dB 1W/1m • Dispersion: 90° • Net weight: 39 lbs. • Dimensions: 19" H x 14-1/2" W x 14-1/16" D • Mfg. #SM12CXT-B

Features

• High performance Atlas Sound coaxial loudspeakers in a versatile, flyable, wood enclosure
• Durable, black, rough-coat finish with an attractive, heavy-duty metal grill assembly
• Internal, high efficiency 60 watt 70.7/100V transformer (may be bypassed for 8 ohm operation)
• Barrier strip input for 70.7/100V/8 ohm or parallel 4-pole Speakon® input for 8 ohm operation only
• Fuse protection for low and high frequency drivers

Description

SheetBlok Sound Isolation Barrier is a dense, limp-mass vinyl material that is about 6dB more effective than solid lead at stopping the transmission of sound. It acts as a thin, dense sound barrier layer in walls, ceilings or floors and is most effective when used as one component of a multi-layered construction scheme. SheetBlok helps in decoupling (i.e. floating) floors and walls and, while it's not normally considered a finish product per se, it is paintable with latex paint.

Features

• dense, limp-mass vinyl material that is about 6dB more effective than solid lead at stopping the transmission of sound
• Service Temperature: -40° to 180° F
• Tensile Strength: 400 psi Tear Strength: 70#/inch; Flammability: Rated UL94 S.E. "0"; Passes test MVSS-302

Description

Eastwood Thermo-Coustic is the ultimate in thermal and acoustic protection for your muscle car, street rod, SUV, truck, or boat. Minimize road noise Reduce engine and exhaust heat Increase stereo sound quality High strength adhesion Easy to install Equivalant in performance to more expensive name brands Includes (9) 18"x30"x0.063" thick sheets to cover a total of 33.75 sq. ft.